Neorouter настройка сервера windows

# Настройка предпочтений

Некоторые настройки могут быть установлены персонально для каждого администратора сервера. Установка этих настроек доступна по кнопке Система → Предпочтения… в правом верхнем углу панели управления.

В число персональных настроек входит язык интерфейса панели управления и используемый часовой пояс. Также в секции Экспорт CSV можно настроить параметры — используемую кодировку и символ-разделитель для представления строки таблицы в текстовом формате.

После изменения предпочтений нажмите Применить чтобы сохранить их.

  1. Кнопка для перехода к разделу Предпочтения

  2. Настройки работы с панелью управления

  3. Настройки экспорта отчётов

Install NeoRouter server for Mac

1. Visit http://www.neorouter.com/Downloads.html and download NeoRouter server for Mac.

2. Uninstall previous version, if needed:

sudo /Library/NeoRouter/rmnrserver.sh

rmnrclient.sh can optionally remove user data. All NeoRouter user data is written to /usr/local/ZebraNetworkSystems/NeoRouter.

Double-click nrserver- — .tar.gz to expand it, then double-click on the nrserver- — .mpkg to launch installer wizard.

NeoRouter is installed under /Library/NeoRouter folder. nrserver will automatically start after installation and every time OS starts.

Tip: Manually start/stop nrserver

0.9.9 uses launchd. Use «launchctl remove com.neorouter.nrserver» take over control from launchd. Then you can run «sudo /Library/NeoRouter/nrserver» or «sudo killall nrserver»

0.9.8 uses startup items. Use «/Library/StartupItems/nrservice/nrservice

5. Setup Domain and User Accounts: see instructions under «Install NeoRouter server for Linux».

Install NeoRouter server for Linux

1. Visit http://www.neorouter.com/Downloads.html and download NeoRouter Server for your Linux distribution.

  • Ubuntu & Debian: sudo dpkg -i nrserver- — .i386.deb
  • Fedora & SUSE: sudo rpm -i nrserver- — .i386.rpm

Note — OpenSSL on Fedora: NeoRouter is compiled using openssl 0.9.8g on Fedora 9. If you have an older version of Fedora, please upgrade the openssl package. You may also need to add the following symbol links:

In a terminal, run command «sudo nano /etc/sysconfig/iptables», add «-A INPUT -m state —state NEW -m tcp -p tcp —dport 32976 -j ACCEPT» before «COMMIT».

  • SUSE:
    • a. Launch firewall configuration tool
    • b. Choose «Allowed Services» in the left panel
    • c. Choose «External Zone» in the first drop-down box
    • d. Choose «NeoRouter server» in the second drop-down box
    • e. Click «Add» button
    • f. Click «Next»
    • g. Click «Finish» to save the changes

Ubuntu does not support firewall by default.

If you have any firewall enabled then it’s best to read its manual how to open the ports. The default port of the NeoRouter server is 32976 TCP.

  • a. GUI wizard method: Use NR Configuration Explorer to configure your nrserver. Currently Configuration Explorer is only available on Windows. (NR Web Console is available on other platforms since v2.x)
    • i. Install NeoRouter client for Windows on a Windows PC in the same LAN.
    • ii. Launch NeoRouter Configuration Explorer, enter your Linux user in the username field the IP address of the Linux server in «log on to» field. Proceed to sign in.
    • iii. Now the Configuration Explorer is connected to nrserver on your Linux box so that we can change the settings.
    • iv. Optionally, choose the settings tab, and edit domain. More details
    • v. You can Sign In via NeoRouter Network Explorer or configuration console using the same account you use to sign into Linux.
  • b. Command line method:
    • i. nrserver -showsettings
    • ii. nrserver -setdomain myPrivateNetwork myDomainPassword
    • iii. Optional step to change VPN network IP range: nrserver -dhcp 10.1.1.0 255.255.255.0
    • iv. nrserver -showsettings
    • v. nrserver -showusers
    • vi. nrserver -adduser serverbox password admin
    • vii. nrserver -adduser jdoe password admin
    • viii. nrserver -adduser bsmith password user
    • ix. nrserver -showusers

5. Install the appropriate NeoRouter client package on a workstation and attempt to log into the network via one of the users previously created. More details

6. Optionally, install the NeoRouter client package on the same machine running the NeoRouter server package. This allows VPN users to connect with other services hosted by the same computer as the NeoRouter server.

Install NeoRouter server for Linux

1. Visit http://www.neorouter.com/Downloads.html and download NeoRouter Server for your Linux distribution.

  • Ubuntu & Debian: sudo dpkg -i nrserver- — .i386.deb
  • Fedora & SUSE: sudo rpm -i nrserver- — .i386.rpm

Note — OpenSSL on Fedora: NeoRouter is compiled using openssl 0.9.8g on Fedora 9. If you have an older version of Fedora, please upgrade the openssl package. You may also need to add the following symbol links:

In a terminal, run command «sudo nano /etc/sysconfig/iptables», add «-A INPUT -m state —state NEW -m tcp -p tcp —dport 32976 -j ACCEPT» before «COMMIT».

  • SUSE:
    • a. Launch firewall configuration tool
    • b. Choose «Allowed Services» in the left panel
    • c. Choose «External Zone» in the first drop-down box
    • d. Choose «NeoRouter server» in the second drop-down box
    • e. Click «Add» button
    • f. Click «Next»
    • g. Click «Finish» to save the changes

Ubuntu does not support firewall by default.

If you have any firewall enabled then it’s best to read its manual how to open the ports. The default port of the NeoRouter server is 32976 TCP.

  • a. GUI wizard method: Use NR Configuration Explorer to configure your nrserver. Currently Configuration Explorer is only available on Windows. (NR Web Console is available on other platforms since v2.x)
    • i. Install NeoRouter client for Windows on a Windows PC in the same LAN.
    • ii. Launch NeoRouter Configuration Explorer, enter your Linux user in the username field the IP address of the Linux server in «log on to» field. Proceed to sign in.
    • iii. Now the Configuration Explorer is connected to nrserver on your Linux box so that we can change the settings.
    • iv. Optionally, choose the settings tab, and edit domain. More details
    • v. You can Sign In via NeoRouter Network Explorer or configuration console using the same account you use to sign into Linux.
  • b. Command line method:
    • i. nrserver -showsettings
    • ii. nrserver -setdomain myPrivateNetwork myDomainPassword
    • iii. Optional step to change VPN network IP range: nrserver -dhcp 10.1.1.0 255.255.255.0
    • iv. nrserver -showsettings
    • v. nrserver -showusers
    • vi. nrserver -adduser serverbox password admin
    • vii. nrserver -adduser jdoe password admin
    • viii. nrserver -adduser bsmith password user
    • ix. nrserver -showusers

5. Install the appropriate NeoRouter client package on a workstation and attempt to log into the network via one of the users previously created. More details

6. Optionally, install the NeoRouter client package on the same machine running the NeoRouter server package. This allows VPN users to connect with other services hosted by the same computer as the NeoRouter server.

# Смена регистрационного ключа

Чтобы сменить регистрационный ключ, войдите в панели управления в раздел Панель управления → Информация о сервере и нажмите кнопку Регистрация.

Что делать, если при смене ключа высвечивается надпись «Смена компьютера не доступна для этого регистрационного ключа»?

Это значит, что ваш ключ «привязан» к компьютеру, на котором был установлен сервер. Чтобы отключить такую привязку, свяжитесь с нами одним из способов.

Если при вводе ключа появляется надпись У сервера отсутствуют действующие лицензии. Пожалуйста, обратитесь к техподдержке, чтобы сделать это вручную, значит, срок действия лицензии с этим ключом истёк или на вашем ПК сбились время и дата. Проверьте, чтобы они соответствовали действительности.

Настройка сервера

После установки сервер можно не настраивать — не будет работать с настройками по умолчанию. В данном разделе рассмотрим примеры некоторых настроек, которые могут показаться интересными.

1. Пароль для подключения

Чтобы ограничить подключения к нашему серверу, мы можем задать парольную фразу. Для этого открываем файл с настройками сервера:

vi /etc/coturn/turnserver.conf

И снимаем комментарии со строк:

use-auth-secret

static-auth-secret=north

… а также меняем north на любой пароль:

static-auth-secret=Str0ngPa$$word

Перезапускаем сервис:

systemctl restart coturn

2. Сервер за NAT (external-ip)

Если наш сервер сам находится за NAT, необходимо настроить значение для опции external-ip, которое укажет, какой адрес нужно использовать в качестве ретранслятора.

Открываем конфигурационный файл:

vi /etc/coturn/turnserver.conf

а) если используется единственный внешний адрес, указываем его:

external-ip=60.70.80.91

б) если у нас множество адресов, запись может быть такой:

external-ip=60.70.80.91/172.17.19.101
external-ip=60.70.80.92/172.17.19.102

* где 60.70.80.91 и 60.70.80.92 — публичные адреса; 172.17.19.101 и 172.17.19.102 — приватные.

Перезапускаем сервис:

systemctl restart coturn

3. Настройка SSL

Передача данных возможна с применением шифрования. Для этого, во-первых, нам нужно получить сертификат; во-вторых — настроить сервер STUN.

Сертификат можно купить или получить бесплатно в Let’s Encrypt. В данной инструкции будет использоваться купленный сертификат. Предположим, что его мы сохранили в файлах /etc/pki/coturn/public/cert.pem и /etc/pki/coturn/private/cert.key.

Теперь открываем конфигурационный файл сервера:

vi /etc/coturn/turnserver.conf

Снимаем комментарии и правим значения для опций:

cert=/etc/pki/coturn/public/cert.pem

pkey=/etc/pki/coturn/private/cert.key

Перезапускаем сервис:

systemctl restart coturn

4. Только STUN или TURN

По умолчанию, coturn запускается и работает в режиме STUN/TURN. Если нужно, чтобы работал только один из них, открываем настройки:

vi /etc/coturn/turnserver.conf

а) если нужен только STUN:

stun-only

б) если нужен только TURN:

no-stun

Перезапускаем сервис:

systemctl restart coturn

# Установка сервера

TrueConf Server поставляется в виде дистрибутива, в который входит серверная часть и клиентские приложения для операционной системы Windows. Клиентские приложения TrueConf для других популярных операционных систем доступны на веб-сайте TrueConf (на гостевой странице TrueConf Server можно найти ссылки для их скачивания).

После загрузки дистрибутива запустите его, чтобы начать установку. Процесс установки займёт менее минуты.

В процессе установки вы можете указать:

  • TCP порт для доступа к панели управления по HTTP;

  • TCP порт базы данных для отчётов сервера.

Подсказка

Порт базы данных для отчётов сервера по умолчанию равен , выбирается при установке и после этого не может быть изменён (кроме как путём полной переустановки TrueConf Server). Для панели управления по умолчанию выбирается порт или (если порт недоступен). Если порты и оба недоступны, то укажите его сами в процессе установки.

Если порт панели управления не равен (для подключения по HTTP) или (для подключения по HTTPS), то для открытия панели управления его необходимо явно указать в адресной строке браузера после двоеточия в имени хоста (например, ).

Можно ли установить TrueConf Server на ПК, где уже есть веб-сервер?

Да. Инсталлятор либо сам выберет свободный порт, либо предложит задать его вручную.

Когда установка завершится, в браузере автоматически откроется панель управления администратора.

Внимание!

При установке TrueConf Server за межсетевым экраном (firewall) для завершения регистрации необходимо сделать порт открытым для нашего регистрационного сервера .

Можно ли изменить порт для доступа к панели управления без переустановки сервера?

Да. Для этого войдите в рабочую директорию сервера () и откройте через любой текстовый редактор файл listen.conf (обязательно с правами администратора). Измените номер порта в названии параметра (например, ), после чего сохраните внесённые изменения. Перезагрузите компьютер, на котором установлен сервер.

User Access Auditing

NeoRouter Professional Edition (v1.2.0+) supports audting feature. It allows administrator to trace the user access activies, such as sign in, sign out and so on. In v1.2.0, it logs the auditing information to a file. By default, this feature is disabled.

The parameters controlling auditing feature is defined in Feature.ini

1. Enable or disable auditing

2. Specify the audit log file location

AuditLogFileLocation=

By default, the audit log file is located in the main configuration folder and the file name is in the format:

Note: the folder specified must exist.

3. Specify max number of lines in log file

If it’s 0 (zero), all information will be put in a single audit log file. By setting the max number of lines in each log file, it will split the information into several files.

источник

Manage Add-ons (Mac)

a.Launch NeoRouter Network Explorer; choose menu «File — Add-ons».

b. The Add-ons Manager dialog lists all the existing add-ons, including system default ones and those added
by user.

c. An add-on is essentially an apple script with NeoRouter parameters. Here are some examples:

Name Script
Copy IP set the clipboard to «$NRIPAddress»
Ping tell application «Terminal» to do script «ping $NRIPAddress»
Shared Folder tell application «Finder» to open location «smb://$NRIPAddress»

Variables $NRIPAddress and $NRComputerName will be replaced with the IP and name of the selected
computer before the add-on is executed.

d. You can also create new add-ons or edit existing ones using the Add-On Properties dialog.

e. To learn more about Apple Script, please visit the following websites:

Create custom add-on (Advanced)

You can customize an add-on or even create your own.

As an example, I will show you how to create an add-on to get the system info of an remote computer using PsTools by Mark Russinovich and systeminfo.exe command shipped with Windows.

PsTools: http://technet.microsoft.com/en-us/sysinternals/bb896649.aspx

systeminfo: http://technet.microsoft.com/en-us/library/bb491007.aspx

1. Launch NeoRouter Network Explorer, open Add-ons Manager dialog

2. Click «+» button to create a new add-on

3. In add-on properties dialog, enter the following:

   Add-on name: psexec systeminfo
   Command: cmd.exe /C "c:\pstools\psexec.exe \\%NRIPAddress% -u <username> systeminfo & pause"
            Please replace <username> with username on the remote computer
   Comment: Get SystemInfo of remote machine using psexec
   Startup Type: Manual
   Icon: click "Change Icon" button to choose one that's easy to recognize.

In the command, you can use Windows environment variables or NeoRouter variables like «%NRIPAddress%». If you click on the «…» button next to the Command edit box, you will see the «Edit Command» dialog with a list of variables you can use.

Three «Startup types» are supported:

   Manual: the add-on will be displayed in the launchpad of the 
   Network Explorer, and user manually launch the program.
   Automatic after signing in: the add-on command is automatically 
   executed when user signs into NeoRouter Network Explorer.
   Automatic after Windows starts: the add-on command is 
   automatically executed when Windows starts.

4. To launch the new add-on, just click on the target computer in Network Explorer, and choose the add-on in the pop-up launchpad.

5. In the above steps, I have assumed that PsTools are installed at «c:\PsTools» and the remote computer has telnet service enabled. If not, let’s configure the system now.

PsTools: download from http://technet.microsoft.com/en-us/sysinternals/bb896649.aspx, and extract to «c:\PsTools» folder

Configure telnet service on remote computer: This step is required on XP/Vista, but not necessary on Windows 2003/2008 servers.

a) run services.msc from the «Start -> Run» command window and configured
the Telnet service for Automatic. Start the service.

c) launch Windows firewall, and add C:\WINDOWS\System32\tlntsvr.exe to exception list.

Install NeoRouter server for Tomato firmware

NeoRouter server for Tomato is provided as a custom build of the full tomato firmware in TRX format. You can download the TRX file from from http://www.neorouter.com/Downloads.html.

Please visit OpenWRT Wiki for instructions on flashing your router with TRX.

2. In tomato UI – Administration – Jffs2, enable jffs and format if needed

3. In tomato UI – Administration – scripts – WAN up,

5. Setup Domain and User Accounts: see instructions under «Install NeoRouter server for Linux».

By default, our built-in script can automatically open firewall for the tomato router’s LAN IP address. But if you are using v0.9.4.881 or older AND you have changed the default LAN IP address from 192.168.1.1 to a different LAN IP Address, you need to edit firewall setting manually to open up the listening port for NeoRouter.

In tomato UI – Administration – scripts – Firewall, add following lines:

Note: If your box is not a fresh new router, some other rules may affect the lines above and it may not be able to work. In this case, you may want to use the following rules:

In some cases, the computers behind the Tomato box cannot use the NeoRouter domain name or public IP address of the router to connect to the NeoRouter server. You can use port forwarding to map the listen port (32976) to the local IP address of the router as well. For example, your router has Internet IP (202.xxx.xxx.xxx) and local IP address (192.168.1.1), you can create a port forward record to map 32976 to local 192.168.1.1, so that the computers behind the router can work.

If you have trouble signing into NeoRouter Network Explorer from a remote client, please try DISABLE the Inbound Connection Logging.

In tomato UI — Status — Logs — Logging Configuration, disable Inbound Connection

How to install NeoRouter on Fonera 2.0N

Fonera 2.0N (FON2303) combines all of FON’s revolutionary WiFi sharing and money making features with 802.11n wireless technology, delivering faster connection speeds and more WiFi reach. It comes with the firmware 2.3.0.0. The hardware spec is as following:

  • System-On-Chip Ralink 300MHz (mipsel)
  • Flash size 8 MB
  • RAM 64 MiB
  • Wireless Integrated Ralink 802.11n
  • Ethernet 1+4 RJ45
  • Ralink USB 2.0/1.1

Since Fonera 2.0N provides enough RAM, we can install and run both NeoRouter server and client on the box. Because of the plugin’s limitation, NeoRouter server is released as a standard FON plugin and can be installed through the «Application» interface; while the NeoRouter client is released as a tgz package, which can be run from a USB drive or a shared folder.

2. Install NeoRouter Server

Download the NeoRouter Server for Fonera 2.0N (FON Plugin) package from our download website.

Open your browser and log on to your Fonera web interface. By default, it’s http://192.168.10.1

Go to the page: «Dashboard» >> «Applications»

Make sure there is about 1.3MB free space left on the device.

Click on the «Browse…» button and choose the NeoRouter package you downloaded, then click on the «Upgrade» button.

It may take about 10 seconds to install the package and it will refresh the page when it is finished. Don’t go to other pages while installing, or it may not be installed properly.

After installation, you will see:

Now, go to the «Dashboard» page, you will see:

Done. Clicking on the «NeoRouter Server» icon, you will be brought to our website, so that you can download the NeoRouter client software and configure the NeoRouter server running on the box.

3. Setup Domain and User Accounts

Please .

Change listening port

By default, it opens the port 32976 by changing the firewall rule, so that NR Client can connect to the server. If you change the listening port to a different port, for example: 443, you may want to fix the firewall rule manually.

# set firewall
echo "/usr/sbin/iptables -A input_daemon -p tcp --dport 443 -j  zone_wan_ACCEPT">>/etc/firewall.fon
/etc/init.d/firewall restart

4. Install NeoRouter Client

As Fonera 2.0N does not provide enough space for installing the NeoRouter client package, we can run it from a USB drive or a shared folder. If you really want to install it, please use the NeoRouter Client for OpenWrt Kamikaze v8.09 package, which can be downloaded from our website.

Download NeoRouter Client for Fonera 2.0N package from our website.

Copy it to your USB drive or the shared folder and connect the USB drive to your box or mount the shared folder to your box.

Use ssh to log on to the box.

Go to the folder where the file is stored.

Extract files

  > tar zxvf nrclient-0.9.9.1528-fon2n-mipsel.tgz

If you didn’t install the NeoRouter server plugin for FON, then

  > cp libuClibc++-0.2.2.so /usr/lib/libuClibc++-0.2.2.so
  > ln -s /usr/lib/libuClibc++-0.2.2.so /usr/lib/libuClibc++.so.0
  If you have installed, please ignore this step.

Setup NeoRouter Client

  > mkdir /usr/local/ZebraNetworkSystems/NeoRouter/
  > ./nrservice &
  > ./nrclientcmd
    Follow the instruction to register the Fonera 2.0N box to your server.

Because of the firewall, the NeoRouter client cannot create P2P connection to other computers in the NeoRouter network, instead of use Relay mode. You can set proper firewall rules to make it work.

Done.

Run as a service

Assume you have a copy of the nrservice under the folder /usr/bin/nrservice. If it is in a different folder, please modify the scripts properly.

Make sure

a. The folder /usr/local/ZebraNetworkSystems/NeoRouter/ exits; if it does not exit, please create one.

b. Run nrclientcmd and sign in successfully at lease once, so that it will store the register information to the folder above and nrservice can connect to the nrserver automatically.

Create a script for checking nrservice process

vi /usr/bin/nrcronclient

#!/bin/sh

if ; then
  /usr/bin/nrservice >/dev/null &
fi

exit 0

chmod 755 /usr/bin/nrcronclient

Add a new entry to fonstate

/etc/init.d/fonstate stop

vi /etc/config/fonstate

config fontimer
       option action   "/usr/bin/nrcronclient"
       option period   30

/etc/init.d/fonstate start

La Fonera+ support

For more information about NeoRouter for La Fonera+, check out See Instructions for La Fonera+

User Access Auditing

NeoRouter Professional Edition (v1.2.0+) supports audting feature. It allows administrator to trace the user access activies, such as sign in, sign out and so on. In v1.2.0, it logs the auditing information to a file. By default, this feature is disabled.

The parameters controlling auditing feature is defined in Feature.ini

1. Enable or disable auditing

2. Specify the audit log file location

AuditLogFileLocation=

By default, the audit log file is located in the main configuration folder and the file name is in the format:

Note: the folder specified must exist.

3. Specify max number of lines in log file

If it’s 0 (zero), all information will be put in a single audit log file. By setting the max number of lines in each log file, it will split the information into several files.

источник

Список баз подразделения

Предлагаю на рассмотрение небольшую обработку, она бывает очень полезна, когда надо быстро и в удобоваримом виде посмотреть, какие базы у Вас есть на
сервере. Обработка запускается как внешняя из любой базы, результатом является список всех баз на 1С сервере, также если в описании баз установлена отметка, например, «Рабочая база»,
она выводится на закладку (смотри скриншот). Ниже дается описание кода, данный код может использоваться как процедура в других мультибазовых программах.
Обработка предназначена для работы в клиент-серверных базах и тестировалась на платформе 8.3.14.1854.

1 стартмани

Install NeoRouter server for Windows

1. Visit http://www.neorouter.com/Downloads.html and download NeoRouter Standard Edition for Windows.

2. Run the installation wizard you have just downloaded, choose NeoRouter server, and click the Next button.

3. Setup a domain name that can uniquely identify your virtual LAN. You will need to enter the domain name in the «log on to» box during sign in. ee sign in for details.

4. Setup the administrator account for your domain. You will need to enter the username and password during signin. See sign in for details.

5. For secure purpose, it’s highly recommended to setup your router to enable port forwarding to the NeoRouter server at TCP port 32976 for remote client connections.

NeoRouter server supports Universal Plug and Play (UPnP) as well. On Windows 2000/2003/XP, you can use UPnP instead of port forwarding.If the server PC is behind a residential router, you need to ensure UPnP is enabled on the router.

If your router does not support UPnP, please add a static port forward entry.

Install NeoRouter server for Mac

1. Visit http://www.neorouter.com/Downloads.html and download NeoRouter server for Mac.

2. Uninstall previous version, if needed:

sudo /Library/NeoRouter/rmnrserver.sh

rmnrclient.sh can optionally remove user data. All NeoRouter user data is written to /usr/local/ZebraNetworkSystems/NeoRouter.

Double-click nrserver- — .tar.gz to expand it, then double-click on the nrserver- — .mpkg to launch installer wizard.

NeoRouter is installed under /Library/NeoRouter folder. nrserver will automatically start after installation and every time OS starts.

Tip: Manually start/stop nrserver

0.9.9 uses launchd. Use «launchctl remove com.neorouter.nrserver» take over control from launchd. Then you can run «sudo /Library/NeoRouter/nrserver» or «sudo killall nrserver»

0.9.8 uses startup items. Use «/Library/StartupItems/nrservice/nrservice

5. Setup Domain and User Accounts: see instructions under «Install NeoRouter server for Linux».

Install NeoRouter server for Linux

1. Visit http://www.neorouter.com/Downloads.html and download NeoRouter Server for your Linux distribution.

  • Ubuntu & Debian: sudo dpkg -i nrserver- — .i386.deb
  • Fedora & SUSE: sudo rpm -i nrserver- — .i386.rpm

Note — OpenSSL on Fedora: NeoRouter is compiled using openssl 0.9.8g on Fedora 9. If you have an older version of Fedora, please upgrade the openssl package. You may also need to add the following symbol links:

In a terminal, run command «sudo nano /etc/sysconfig/iptables», add «-A INPUT -m state —state NEW -m tcp -p tcp —dport 32976 -j ACCEPT» before «COMMIT».

  • SUSE:
    • a. Launch firewall configuration tool
    • b. Choose «Allowed Services» in the left panel
    • c. Choose «External Zone» in the first drop-down box
    • d. Choose «NeoRouter server» in the second drop-down box
    • e. Click «Add» button
    • f. Click «Next»
    • g. Click «Finish» to save the changes

Ubuntu does not support firewall by default.

If you have any firewall enabled then it’s best to read its manual how to open the ports. The default port of the NeoRouter server is 32976 TCP.

  • a. GUI wizard method: Use NR Configuration Explorer to configure your nrserver. Currently Configuration Explorer is only available on Windows. (NR Web Console is available on other platforms since v2.x)
    • i. Install NeoRouter client for Windows on a Windows PC in the same LAN.
    • ii. Launch NeoRouter Configuration Explorer, enter your Linux user in the username field the IP address of the Linux server in «log on to» field. Proceed to sign in.
    • iii. Now the Configuration Explorer is connected to nrserver on your Linux box so that we can change the settings.
    • iv. Optionally, choose the settings tab, and edit domain. More details
    • v. You can Sign In via NeoRouter Network Explorer or configuration console using the same account you use to sign into Linux.
  • b. Command line method:
    • i. nrserver -showsettings
    • ii. nrserver -setdomain myPrivateNetwork myDomainPassword
    • iii. Optional step to change VPN network IP range: nrserver -dhcp 10.1.1.0 255.255.255.0
    • iv. nrserver -showsettings
    • v. nrserver -showusers
    • vi. nrserver -adduser serverbox password admin
    • vii. nrserver -adduser jdoe password admin
    • viii. nrserver -adduser bsmith password user
    • ix. nrserver -showusers

5. Install the appropriate NeoRouter client package on a workstation and attempt to log into the network via one of the users previously created. More details

6. Optionally, install the NeoRouter client package on the same machine running the NeoRouter server package. This allows VPN users to connect with other services hosted by the same computer as the NeoRouter server.

Оцените статью
Рейтинг автора
5
Материал подготовил
Андрей Измаилов
Наш эксперт
Написано статей
116
Добавить комментарий